MCPLA silicone is a two component addition type silicone.The polymerization can be accelerated heat (max.1500 C).The silicone components are delivered as liquids, which once mixed and cured transform into a translucent, elastic and resistant material.Polymerization occurs without formation of heat.

Platinum cure silicone is a two component elastomer cross-linking at room temperature. The polymerization can be accelerated by heat (max.1500 C). The silicone components are delivered as liquids, which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.

MC Silicone Platinum Cure Series is a two component rubber cross-linking at room temperature. The polymerization can be accelerated by heat. The silicone components are delivered as liquids, which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.

Platinum cure silicones, also called addition cure silicones, are two-component high tear strength, flexible mold compounds. They are recommended as a mold material for rapid prototyping, casting polyurethane, epoxy, and polyester resins, wax and a wide range of other casting materials. They exhibit extremely low shrinkage and high physical properties. These rubbers are chemically sensitive to latex, sulfur, and certain other materials.

Silicone Base Color: White                 Curing Agent: Transparent/Blue
Mix ratio: 100:2                                   Pot life: 30-40 mins
Curing time: 4-6 hrs                            Hardness: 25 shore A