Environmental Non-Toxic 1:1 Mix Ratio Fast Setting Silicone Putty for Dental Impression Use

Product Description

Silicone Putty is ideal for a wide range of impression type mold applications, including Castin’Craft Clear Casting Resin, EasyCast Clear Casting Epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals! EasyMold is a easy to use, Odor Free, Non-Toxic, Food Grade, two component silicone putty, whichdoes not shrink and remains resilient throughout the life of application.

Fast Curing and Durable
Our putty is non-toxic and odor free. It will handle heat up to 450 F.

Self-releasing – no mold release agent required for most applications. Long shelf life, no shrinkage. Not intended for food contact applications.

Features of Fast Cure Food Grade Mold Making Silicone Putty:
-Easy to use, 1-1.5 minutes working time, 3-5 minutes cure.
-Ideal for small molds, excellent detail from original.
-Strong, flexible, reusable molds.
-High Heat range, up to 400o F.
-No Shrinkage.
-Self releasing, no mold release agent required for most applications.
-Odorless, Non Toxic. FDA Compliant, Food Grade.

Technical Overview of Fast Demould Dental Use Silicone Putty: 

Physical Properties:

Applications of Fast Demould Dental Use Silicone Putty:

Applications include making fast mold impressions from almost any surface, orthotics / orthopedic, equine hoof repair, jewelry making and more.

Using Instructions

1. Under the room temperature, take the same amount of base component (blue) and catalyst component (white).

2. Mix the two components together. It is recommended to use the blue spoon to take the base component and white spoon to take catalyst component.

3. Use your fingertips to mix the two components together and knead for at least 30 seconds until they are mixed completely.

4. Close the lid immediately 

after usage, the cover can not be interchanged.

Precautions of Fast Demould Dental Use Silicone Putty:

1. Do not use natural rubber gloves. It is recommended to use disposable polyethylene plastic gloves.

2. The product contains platinum catalyst, sulfur, phosphorus, amine, etc. will slow down or even stop the curing reaction, and thus it must avoid sulfur, phosphorus, amine, acrylic and meth acrylic acid esters and other chemical products in use.

3. Close the lid tightly and immediately after use, keep it in cool place, and be refrigerated in summer.

4. The temperature has a significant impact on the curing time; the curing reaction will slow down at low temperature, and speed up at high temperature curing speed. It should adjust operation rhythm according to the environment and the finger temperature.

5. It is strictly recommended to use the same amount of base and catalyst. Unequal amount will lead to delayed or accelerated cure.

6. Avoid contact with water, water will make the material deteriorated.

Package of Silicone Putty

100g/jar, 350g/jar,500g,1kg,25kg

Why choose MC silicone putty?

Skin-safe
Non-toxic - contains no nasties
Fast Cure - sets within 30 minutes
Easy - you don't even need to weigh it... just take out two equal looking amounts of putty from the tubs
No mould box needed - this putty can be used on vertical surfaces, 3d items and even on your toes (if that's your kind of thing)
Vegan-friendly & cruelty-free