How to make silicone mold by pouring way?

1-Prepare original model, clean & smooth original model
2-Place original model on board and round with frame
3-Spray release agent onto original model surface
4-Weigh silicone and curing agent according to its mix ratio and mix them thoroughly in a new container
5-Put silicone mixture into vacuum machine to release the air bubbles
6-Pour the silicone mixture into original model frame, allow it cure for 4-6 hours.
7-Then demould after complete cure for 24 hours.
Your silicone mold is ready for casting.

Welcome to email julie@mcsilicone.com for further information. Thanks.